Edwin M SarmientoVMWare – Edwin M Sarmiento https://www.edwinmsarmiento.com Intentional Excellence Mon, 13 Apr 2026 21:00:49 +0000 en-US hourly 1 84283043 No Drives Found error installing CentOS 5.2 on VMWare https://www.edwinmsarmiento.com/no-drives-found-error-installing-centos-5-2-on-vmware/ https://www.edwinmsarmiento.com/no-drives-found-error-installing-centos-5-2-on-vmware/#comments Thu, 21 May 2009 00:46:00 +0000 Edwin M Sarmiento http://bassplayerdoc.wordpress.com/2009/05/21/no-drives-found-error-installing-centos-5-2-on-vmware Ok, so this is not my typical blog post that talks about anything Microsoft but it still is technology so it makes a good blog post.

I was installing CentOS 5.2 on a VMWare Workstation image when I suddenly hit a wall with this error

No Drives Found
An error has occurred – no valid devices were found on which to create new file systems. Please check your hardware for the cause of this problem.

Now, this isn’t the first time I’m installing CentOS on a virtual machine nor on a physical hardware but it definitely is the first time to install version 5.2. Back in the old versions, everything was pretty straight-forward and that I had never encountered this error message before. I was beginning to be tempted to use an iSCSI disk for the installation with another virtualized iSCSI disk but I wouldn’t want to go down that road unless I will be configuring this virtual machine as a clustered server. Having searched thru a ton of newsgroup and blog posts on similar issues, a few of them mentioned changing the Operating System to Red Hat Enterprise Linux or Other Linux 2.4.x kernel to make it work. I did find a recommendation to change the virtual disk from SCSI (which happens to be the default setting when you configure your virtual machine) to IDE. That did the trick, although I needed to create a new virtual machine in the process which was the quickest way to do it.

So, remember – use an IDE disk in your VMWare image when installing CentOS 5.2

]]> https://www.edwinmsarmiento.com/no-drives-found-error-installing-centos-5-2-on-vmware/feed/ 7 188 Need multiple CPUs for your VMWare image? https://www.edwinmsarmiento.com/need-multiple-cpus-for-your-vmware-image/ https://www.edwinmsarmiento.com/need-multiple-cpus-for-your-vmware-image/#respond Thu, 28 Aug 2008 10:08:00 +0000 Edwin M Sarmiento http://bassplayerdoc.wordpress.com/2008/08/28/need-multiple-cpus-for-your-vmware-image I normally create VMWare images using my laptop for testing and then deploy on servers for production. My laptop only has an Intel Centrino CPU but the target servers have multiple CPUs. My problem lies where VMWare supports multiple CPUs. This means that configuring my VMWare image on my laptop would not take advantage of having the production server running on multiple CPUs. Initially, I thought it was just a matter of changing the numvcpus variable in the VMX file associated with my image. But, then, the processors are only visible on the Computer Management console and not from Task Manager. I found this article on how to change the kernel and hardware abstraction layer on a virtual machine running Windows Server 2003 with Service Pack 2. I downloaded Windows Server 2003 Service Pack 2 to extract the following files

halmacpi.dl_
ntkrnlmp.ex_

Next, I’ve expanded the appropriate files needed by the HAL and MP Kernel by running the following command in DOS

expand halmacpi.dl_ halmacpi.dll
expand ntkrnlmp.ex_ ntkrnlmp.exe

This will extract the halmacpi.dll and ntkrnlmp.exe files. Next, copy these files on your Windows directory. Type %windir%system32 in your Run command to retrieve the Windows directory. After copying the files, modify the boot.ini using the System startup parameters option as you won’t be able to do so directly using Notepad. Simply add the following items on the active boot option line. Mine looks something like this

multi(0)disk(0)rdisk(0)partition(1)WINDOWS=”Windows Server 2003, Enterprise, ACPI MPS” /fastdetect /NoExecute=OptOut /KERNEL=ntkrnlmp.exe /HAL=halmacpi.dll

I’ve added the ,ACPI MPS in the partition(1)WINDOWS parameter (the comma included to separate the original Windows Server 2003, Enterprise value from what I added) and the /KERNEL=ntkrnlmp.exe /HAL=halmacpi.dll values. This will allow Windows to detect it is running on ACPI multi processor machine when it reboots and install the new MPS HAL. Try rebooting the virtual machine and once you manage to log in, it will prompt you to reboot the server after managing to install the new MPS HAL. After the second reboot, check your Task Manager and see the additional processor as your virtual Windows now recognizes the configuration you just did. I wonder if I can still do this even though I only have a single physical processor on my machine. Although that doesn’t have much value, its worth trying out.

]]> https://www.edwinmsarmiento.com/need-multiple-cpus-for-your-vmware-image/feed/ 0 135